Today's Message Index:
----------------------
1. 10:41 AM - Re: AMP CPC Series 2, HDP-20, D-sub machined pin crimper (D Wysong)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: AMP CPC Series 2, HDP-20, D-sub machined pin crimper |
> Does anyone know of a high quality crimper that will work with the AMP
> CPC Series 2 (AMP part # 205089-1 & 205090-1),
> HDP-20 d-sub machined pins and sockets?
The most expensive and least complicated route is to buy a new AMP
601966-1 crimper and AMP 601966-5 positioner from any of the online
electronics shops (Mouser, Newark, Allied). That'll set you back
about $600. Ouch.
More complicated and less expensive routes require a cross reference
of the AMP part #'s to MIL spec #'s. Those are as follows:
205089-1 Pin is a M39029/64-369.
205090-1 Socket is a M39029/63-368.
We use DMC tools in our shop. Pics can be seen at
https://www.dmctools.com/store/catalog.asp. You have a few options
depending on what style of crimper you want. These can be verified
using DMCs online cross reference tool to the M39029 part #'s:
The AF8 crimper needs the TP585 positioner for these contacts.
The AFM8 crimper needs the K13-1 positioner for these contacts.
The MH860 crimper needs the 86-30-1 positioner for these contacts.
Buying these tools new from DMC will set you back about $250.
However, they regularly show up on eBay for around $150. We got lucky
and found our AFM8 and positioner at a local military/electronics
surplus shop for around $80 and they work like new.
Hope this helps,
D
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|